2011 GMC Savana 3500 Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2011 GMC Savana 3500
Never overpay. Check prices with our estimator
Ask a mechanic in our community
Our experts translate recalls into plain English
2011 GMC Savana 3500 ProblemsReduced Power and Check Engine Light
The GMC Savana 3500 uses a throttle position sensor (TPS) which commonly fails and causes:
- Check engine light illumination
- Reduced Power message
- OBD trouble code P2135
This issue is related to the throttle position sensor, and can be caused by faulty wiring to the TPS, bad connection at the TPS, or a failed TPS.
To correct this issue, the wiring harness, connector, and throttle position sensor must be inspected, tested, and/or replaced. The most common cause is a faulty TPS.
2011 GMC Savana 3500 QuestionsWhere I can find Service Manual for Cummins B series (4BT3.9) (2 answers)
I really need this repair manual because I want to make a few repair procedures and this would help me in a lot of situations.
2011 GMC Savana 3500 RecallsNatural Gas Leak
Certain vehicles equipped to run on compressed natural gas are being recalled because the high pressure natural gas regulator could develop a leak, increasing the risk of a fire or explosion. Dealers will replace the natural gas regulator to correct this concern.
Certain vehicles are being recalled because if a crash were to occur not requiring deployment of the front airbags, the head of an unbelted front seat passenger could hit the instrument panel, resulting in personal injury because the panel may not sufficiently absorb the impact. As of this writing, General Motors is still working on a remedy for this concern.
IMPCO Technologies installed a compressed natural gas (CNG) fuel system as original equipment on certain 2011-2013 full size GM vans. These vans are being recalled because the electrical connector on the fuel shut off solenoid can corrode, causing the connector to overheat, increasing the risk of a fire. Both dealers and fleet operators will be performing the necessary updates to correct this concern. The corrections include: replacing the fuel shut off solenoid, fuel pump fuse, and adjusting the wiring routing.