1993 Geo Metro Repair and Maintenance Costs
A guide to repairs, service, and maintenance costs for your 1993 Geo Metro
Never overpay. Check prices with our estimator
Ask a mechanic in our community
1993 Geo Metro ProblemsWarped rotors due to uneven lug nut torque
The brake pedal may pulsate on apply due to warped brake rotors. This condition is commonly caused by uneven lug nut torque. Proper lug nut torque is recommended to try and avoid this concern.
The Geo Metro uses a 1.0L 3 cylinder engine that is very sensitive to faulty spark plugs, spark plug wires, distributor cap, and distributor rotor. When one of these ignition system components fail, the Geo Metro will experience one or more of the following:
-Stuttering with loss of power
-Hesitation at various engine speeds
If these issues are related to the components listed above, changing the damaged component will resolve the issue. Less common possible causes are the ignition coil, alternator, and crankshaft position sensor.
The spot welds on the hood striker may be misaligned causing the hood not to latch properly. The correction is to install oversize washers under striker mounting bolts to secure the striker.
1993 Geo Metro QuestionsFuel and temp gauge go past their high marks as soon as I start excelerateing but when sitting still at idle both gauges are fine (1 answer)
Idk even where to start with this.. Not sure what I even need to look at! When I turn the key it starts to turn over, & then starts squealing but it won't start
Throw out bearing needed replacing but before the part arrived I heard a loud clunk and now my car is sitting in a bank parking lot. What do I more than likely need to get fixed?
1993 Geo Metro RecallsHood Opens While Driving
The hood latch mechanism may fail due to cracking on the hood inner panel. Dealers will install two bolts and nuts to secure the striker assembly to the hood inner panel and ensure the hood latch assembly fasteners are securely tightened free of charge to resolve the concern.