The brake pedal may pulsate on apply due to warped brake rotors. This condition is commonly caused by uneven lug nut torque. Proper lug nut torque is recommended to try and avoid this concern.
Resources for the Repair and Maintenance of your 1992 Geo Metro
1992 Geo Metro
1992 Geo Metro Problems
The spot welds on the hood striker may be misaligned causing the hood not to latch properly. The correction is to install oversize washers under striker mounting bolts to secure the striker.
An engine vacuum leak from the throttle-body base gasket may result in a rough idle and/or stumble on acceleration. If this occurs, replacement of the failed gasket will be necessary.
1992 Geo Metro Questions and Answers
After I've been driving over 55mph for about 15 min. (Always when I'm on the highway) the car starts smoking out the exhaust pipe. the smoke is white, and is so thick, cars behind me have...
I have one of those scanning machine to read the engine codes. My check engine light came on and car shut off. I borrowed this machine from a friend, but I can't find where to plug it in at. C...
'92 Geo Metro 1.0 L, manual tranny. When the engine is cold, great acceleration, as it starts warming, has a "dead spot" and sluggish acceleration. Once it is up to operating temp,...
it turns but wont start iv tried quick start got a new coil
Looking For Diagrams Of These