2012 Ford Flex Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2012 Ford Flex
Never overpay. Check prices with our estimator
2012 Ford Flex ProblemsBrake Noise – Front Grunting / Grinding
Defective anchor brackets for the front calipers can cause abnormal brake rotor and pad wear concurrently. Noise can be heard while braking, a grunting or grinding from the front. The caliper anchor brackets should be replaced with revised parts, and also replace the rotors and brake pads.
The 2009-2016 Ford Flex with automatic climate control may have a problem with frequent fan speed changes when using the heater or air conditioner. Normally, the fan speed changes only to maintain a selected temperature, but when the fan speed changes frequently and needlessly, there is an issue with the fan speed control unit.
The fan speed control unit, sometimes erroneously called the blower motor resister, regulates the speed for the blower motor in order to maintain the temperature set by the driver. When it fails, the fan will run at random settings, and the climate control will be inaccurate.
Note: this does not affect the temperature of the air that comes from the vents, it affects the amount of air that comes from the vents.
The repair is simple, and quick. The control unit is located behind the glove box in most models, and removal and installation takes only minutes.
Also note: this only applies to vehicles with single or dual automatic climate control.
2012 Ford Flex QuestionsMy window will not raise. Front passenger. What are possible causes? (1 answer)
How do I get the window up until I can get service?
2012 Ford Flex RecallsDriver's Frontal Air Bag Does Not Inflate Properly
The second stage of air bag deployment may not deploy, resulting in the increased risk of occupant injury. Dealers will inspect and replace the driver's front air bag module as necessary free of charge to resolve the concern.
The steering motor sensor may fail, resulting in loss of power steering assist from the electric power steering system. Dealers will check the power steering control module (PSCM) for any trouble codes and replace the steering gear for vehicles that have codes relevant to the concern stored. If no codes are found, dealers will update the PSCM software free of charge to resolve the concern.