1995 Ford F-150 Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 1995 Ford F-150
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
1995 Ford F-150 ProblemsEngine Oil Pan Gasket May Leak
The engine oil pan gasket can develop a leak. Leaking oil may accumulate on the exhaust system resulting in a burning smell. Replacing the gasket should correct this leak.
If a noise from the rear end is heard when going around turns or after driving at highway speed for an extended period, there is an updated differential clutch kit available.
If there is a vibration or noise at highway speed, it could be from the frontdrive shaft and may require replacement of the double cardan joint. A double cardan joint is a type of driveshaft joint that uses two universal joints.
1995 Ford F-150 QuestionsI have a 1995 Ford F150 I have replaced the modulator and now when I crank it and push the accelerator it will die down but when release the accelerator it picks back up what could be the problem (1 answer)
It has two fuel tanks. The rear one works but when I flip to the front tank it sputters and dies. Any help or advice? Thanks
I also think a tune-up would help it run better. I've put around 2,000 miles on it since getting it. Like for it to have a little more get up and go.
1995 Ford F-150 RecallsRecall 05V388000
Ford has recalled certain 1994-1996 F150 trucks due to a concern with the front seat frames. The seat recliner to seat frame bolts could loosen, fatigue, and fracture. If this occurs, the seat may recline completely, which can cause a loss of vehicle control. Dealers will refresh and replace washers and fasteners at the seat frame to seat recliner mounting.
Ford has recalled certain 1994-1995 F150, F250, and F350 trucks due to shorted wires at the front seat lumbar support. Shorted wiring could cause overheating, melting, and a possible fire hazard at the front seat and cushions. Dealers will inspect the seats, protect and insulate existing wiring, and replace any damaged wiring.