1993 Dodge W250 Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 1993 Dodge W250
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
1993 Dodge W250 ProblemsTransmission failure due to lack of lubrication
The automatic transmission may fail due to a pinched or restricted transmission oil cooler. Our technicians recommend a complete inspection and flushing of the transmission cooler and lines if this type of failure is noted.
Vehicles equipped with 12" diameter rear brakes may encounter premature rear brake shoe wear. If it is found the brake system is functioning as designed our technicians tell us revised brake shoes are available for this concern.
Engine oil leaks from the valve cover gaskets, timing cover gasket, intake manifold gasket, distributor o-ring, and rear main seal area are common. The leak at the rear main seal area is generally not the seal itself but the bearing cap to the engine block seal. An oil leak could also be internal to the distributor, if oil is found inside the distributor then the distributor should be replaced.
1993 Dodge W250 Questionscan upper control arm be welded? where ca i find replacement? left side, who doe (1 answer)
does this type of repair
I replaced my master and slave cylinder three days ago and it didn't come with a new line so I just used the old one. I let it sit for 24 hours to try and get the air out but its still not completely bled and I'm not getting good pressure. what should I do now?
I have a restored 1993 W250 4x4 and ordered some air bags for the rear that turned out to be wrong. The air bags were for a "4 inch lift" which the truck appears to have... But I'm told it's simply a stock height for a 4x4. I'm now told the part number is 2071 (Firestone ...