1993 Dodge Ram Van B250 Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 1993 Dodge Ram Van B250
- when I turn my key to start up my van I get no power is going t my ignition coil
- The dash headlight icon does not go off.
- My van will not start. but it will turn over and will not fire.
- HOW TO GET IT TO START I TURN IT OFF AFTER 30 MINUTES
- trying to replace the thermostat.belt and alternator out but still cant reach it
1993 Dodge Ram Van B250 Problems
The AC/heater (HVAC) system may unexpectedly switch to the defrost mode when accelerating. This system is operated by engine vacuum and should be inspected for any vacuum leaks if this problem develops. There is also a revised vacuum check valve available to address this concern.
The blower motor may operate erratically and the blower switch operation has a sticky or mushy feeling, the detents almost non existent. Our technicians tell us that the blower switch should be removed and inspected for overheating. This is common if the blower motor is frequently operated on high speed as the current flow through the switch tends to melt internal the components. Also carefully inspect all of the switch connector terminals for discoloration due to overheating and replace as required. A poor electrical contact at the connector will also cause the switch to overheat.
On the 3.9L V6, 5.2L V8 and 5.9L V8 the Oil leaks commonly from the valve cover gaskets, intake manifold gaskets (front and rear), timing cover gaskets, distributor O-ring, and the rear main seal area. Using fluorescent engine oil dye can be helpful in determining the source(s) of the oil leak.
1993 Dodge Ram Van B250 Questions
or no power is coming out of it to the distributor , but when turn my key all of the lights come on in the dish panel the engine and the turns over real good but want start
factory weight of van