2007 Dodge Ram 1500 Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2007 Dodge Ram 1500
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
2007 Dodge Ram 1500 ProblemsExhaust Manifold Bolts May Break
On some models a void in the rear window seal may cause a water leak. Water may be present on or under the carpet. The seal will need to be replaced if that is the source.
Engine overheating can result from coolant leaks which are commonly found at the thermostat housing gasket, water pump, heater return tube O-ring at the water pump, intake manifold gasket, and timing cover gasket. Our technicians recommend a complete inspection of the cooling system after any repairs are made to be sure there are no other leaks.
2007 Dodge Ram 1500 Questionscompressor works very sluggish and drags. (1 answer)
Twice on a road compressor has been installed and magnet replaced at the clutch, and partial charged to make sure it will engaged, but compressor will only allow me one 8 oz. of R134A and will not run truly engaged and starts to get sluggish, dragging and noisy slowing my clutch pulley, we change...
Its a dodge ram 1500 4.7l flex engine, the PCM is apparently bad and damaging the engine components. How much should it cost to replace and flash the PCM? Does this have to be done at/by a dealer?
It just started doing this a few days ago, I haven't had any work done on my A/C.
2007 Dodge Ram 1500 RecallsDriver's Front Air Bag Defect
In a crash that deploys the driver's front air bag, the inflator of the air bag can rupture, causing metal debris to strike vehicle occupants. Dealers will replace the front driver's air bag inflator free of charge to correct the concern.
Upon deployment the driver's front airbag inflator could rupture, increasing the risk of personal injury. Dealers will replace the driver's front airbag inflator to correct this concern. Note: this recall supersedes, in part, recall #14V-354.
The clutch ignition interlock switch can fail due to broken return springs. A failed switch can cause the engine not to start or the vehicle to move unexpectedly when trying to start the engine. Dealers will replace the clutch ignition interlock switch to correct this concern.