1992 Chrysler Town & Country Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 1992 Chrysler Town & Country
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
1992 Chrysler Town & Country ProblemsRear Lift Gate Support Attaching Bolts May Break
The rear lift gate support (prop) attaching bolts may break, causing the lift gate to fall unexpectedly. Thorough inspection of the bolts is required; if the support washers are loose, the supports need to be replaced.
Excessive oil consumption—defined as more than one quart per 1,000 miles (on vehicles with less than 50,000 miles) or more than one quart per 750 miles (on vehicles with more than 50,000 miles)—is common. Common causes include exhaust valve guides, valve cover gaskets, camshaft plugs, camshaft seals, and crankshaft seal.
Triggered by a short in the rear wiper motor/circuit (which causes a fuse to blow), the airbag warning light can illuminate erroneously.
1992 Chrysler Town & Country QuestionsIf I replace the master cylinder, do I need to replace the ABS unit to? (1 answer)
The reservoir filled up will brake fluid and started leaking from under the caps. And the ABS and the brake light lit up. I bled them the lights went out, but after I pumped them 5 or 6 times and held them down the lights came back on again .
i have no heat
Where is it located. As the one on my van fluctuates anywhere from 40 to 60 degrees higher than the real outside temperature. I was involved in a front end collision back in July an am wondering if it my have been repositioned (touching some other part of my van) or damaged.