2013 Chevrolet Cruze Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2013 Chevrolet Cruze
Ask a mechanic in our community
Never overpay. Check prices with our estimator
Our experts translate recalls into plain English
2013 Chevrolet Cruze QuestionsWhere is the evaporative emission canister soleniod located on a 2013 chevy (1 answer)
once it gets going in the RPM's are high it runs beautifully but if it's idling sitting still its shaking like crazy and does not want to go in the first gear or weavers all gears are a little shifty
2013 Chevy Cruze LT
Damage is just in front of the back driver side wheel behind the back seat door.
2013 Chevrolet Cruze RecallsEngine Block Heater
In cold temperatures, the insulation on the engine block heater cord can become damaged, allowing the wires to be exposed. Exposed wires increase the risk of electrical shock and personal injury if the cord is handled while it is plugged in. Dealers will replace the block heater cord with one rated for lower temperatures free of charge to correct this concern.
The driver's front airbag inflator may have been manufactured with an incorrect part. If a crash occurs requiring deployment of the driver's airbag, the inflator may rupture and the airbag may not inflate. The rupture could cause metal fragments to strike and potentially seriously injure the vehicle occupants. Additionally, if the airbag does not inflate, the driver is at an increased risk of injury. Dealers will replace the driver side airbag to correct this concern.
These Cruze models are being recalled because the right front axle shaft can break. If this were to occur while driving the vehicle would coast to a stop. If parked in this condition without the parking brake applied, the vehicle could roll unexpectedly. Either case has an increased risk of a crash. Dealers will inspect the affected vehicles and replace the right axle assembly as necessary. Replacement parts are not yet ready, a second letter will be sent when they become available and the recall can be completed. This is an expansion of a previous recall, parts previously installed may need to be replaced again.