1996 Chevrolet Camaro Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 1996 Chevrolet Camaro
- is it commonpractice to check crankshaft if pulling engine to clean heads n seal
- How to install a canister purge valve
- Will not change 1st gear have changed speed sensor 2x and PCM no results idomete
- Mis-Fire at idle but stops when driving or accelerating.
- What can i do to get my service engine soon light off?
1996 Chevrolet Camaro Problems
A door window may move slowly or stop in mid travel due to a failing power window motor. The affected window may start working again after the motor cools off. Replacing the faulty window motor will commonly correct this concern.
The t-top models are prone to water leaks from the t-tops weather strip seals. Our technicians tell us that replacing the all of the t-top related weather strips will commonly correct most leaks. Care should be taken when removing and installing the t-tops in order to avoid damage to the weather strips.
The hood and rear hatch supports may fail causing the hood or hatch fall back down after being raised to the open position. Replacement of failed supports is recommended.
1996 Chevrolet Camaro Questions
had engine pulled 10 months ago for $4300 cleaning and sealing all leaks and now being told crankshaft has gone and to pay $2500 to replace block on just pulled and cleaned engine because they could not forsee crankshaft. They also said thy need to redo heads.
Odometer does not work the sensors work about ten minutes then fail
My 96 z28 from my mechanic said that the engine is mis-firing at idle but when driving or accelerating, the misfire goes away. this is what his computer tells him. he said he doesnt exactly know what is causing it but was offering to fix it for me to the tune of $500 starting off and going up the...
1996 Chevrolet Camaro Reviews
I love this car. It's so fun to drive and I've had no major problems.