2012 Cadillac Escalade Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2012 Cadillac Escalade
Never overpay. Check prices with our estimator
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
2012 Cadillac Escalade ProblemsInside/Outside Door Handles May Break
The inside and outside door handles are prone to breaking.
The throttle position sensor (TPS) on the Cadillac Escalade is notorious for failure which causes:
- Check engine light
- Reduced Power message
- OBD trouble code P2135
This issue is related to the throttle position sensor, and can be caused by faulty wiring to the TPS, bad connection at the TPS, or a failed TPS.
To correct this issue, the wiring harness, connector, and throttle position sensor must be inspected, tested, and/or replaced. The most common cause is a faulty TPS.
2012 Cadillac Escalade Questionsengine cuts off by itself while driving ,no dtc found. (1 answer)
2012 Cadillac Escalade RecallsIgnition Switch
The ignition switch actuator can bind causing the ignition switch to stick in the "start" position. If this were to occur the actuator can unexpectedly release, cause the ignition switch to snap back into the "Accessory" position. This would cause the engine to turn off with an associated loss of brake and steering power assist. If these conditions were to lead to a crash the airbags may not deploy as expected. Dealers will inspect and replace the ignition lock housing as necessary to correct this concern.