2007 Cadillac Escalade Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2007 Cadillac Escalade
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
2007 Cadillac Escalade ProblemsInside/Outside Door Handles May Break
The inside and outside door handles are prone to breaking.
It is common for the fuel level sensor in the fuel tank read the fuel level incorrectly. The sensor must be replaced to correct the condition. Our technicians recommend having the complete fuel pump module replaced on high mileage vehicles.
One or more heater & AC (HVAC) air delivery and/or temperature mode door actuator may fail. This can result in incorrect air delivery or temperature. If this occurs, fault code(s) stored in the HVAC control module should be available to assist with diagnoses.
2007 Cadillac Escalade Questionsbattery light what would be the problems for this (1 answer)
well I have my battery light come on some time took it to the dealer an they replace my sear battery with a delco battery now the light comes on more often than when I had the sears battery in the truck
My Escalade reached its 50k or 5yr. whichever comes first warranty almost two years ago. However my car only has still only approx. 55k mies. Its an 07 but since I am alone and disabled I would feel better knowing I had Cadillac roadside assistance, and 24hour coverage, and the on star maintenanc...
Are there checks or do I need it diagnosed with codes?
I checked my owners manual and it really doesn't get into it as to whether it is locking system that is causing it or if it is an actual engine problem. Nothing shows obvious under the hood. Checked fluid levels and they seem to be okay...
2007 Cadillac Escalade RecallsPossible Under Hood Electrical Fire
The heated washer module under the hood could overheat due to excessive current draw. Under certain conditions, this could result in an under hood fire. This previous recall attempt in 2008 to repair this concern did not have the expected success. Dealers will now permanently disable and remove the heated washer module to correct this concern. This recall is expected to begin on June 20, 2010.
The wiring to the washer system heater may overheat due to a failure in the heater module. This could cause other electrical features to malfunction, smoke to develop, and an electrical fire could result. Dealers will install a wire harness with an inline fuse to protect the washer heater module. This recall is expected to begin on September 12, 2008. The General Motors recall number is 08048.