2012 Cadillac CTS Repair and Maintenance Costs
A guide to repairs, service, and maintenance costs for your 2012 Cadillac CTS
Never overpay. Check prices with our estimator
Ask a mechanic in our community
2012 Cadillac CTS ProblemsCheck Engine Light Due to Gas Cap Issue
Illumination of the Check Engine Light can be caused by a loose or worn gas cap.
The front and rear light bulbs are prone to premature failure. Our technicians tell us that the front bulbs can be very difficult to replace.
2012 Cadillac CTS QuestionsLOUD NOISES due to Sunroof? (2 answers)
I've have the gasket around the sunroof replaced, reseated, reseated once again and the glass panels moved around a bit, all in an effort to reduce the bloody noise in my 2012 CTS! I've been told by several people that this isn't normal. On the flip side, GM Rep's are now tellin...
Weather temp does get below 50 degrees. The vehicle has less than 1700 miles on it. Neither driver nor passenger seats work. Yes I know that the lights don't come on and I don't care about that. Nothing worse than getting into a warm car and sitting on a frozen leather seat! Dealer d...
2012 Cadillac CTS RecallsThe Engine May Stall
The weight on the key ring and/or some other jarring event may cause the ignition switch to move out of the run position, turning off the engine and increasing the risk of a crash. In the event of a crash, if the key is not in the run position, the air bags may not deploy as expected. Dealers will provide two replacement key rings, and vehicles with slotted keys will receive key inserts to correct this concern. Note: Until this recall is performed, customers should remove all items from their key rings, leaving only the ignition key. The key fob (if applicable), should also be removed from the key ring.
The retaining nut for the brake booster pushrod at the brake pedal may not have been tightened correctly during vehicle assembly. The nut could loosen and allow the pushrod to separate from the brake pedal. This would result in loss of braking ability, increasing the risk of a crash. Dealers will inspect the pushrod retention nut and tighten it to the correct specification if necessary. The General Motors recall number is 11318.