2013 Buick Regal Repair and Maintenance Costs
A guide to repairs, service, and maintenance costs for your 2013 Buick Regal
Never overpay. Check prices with our estimator
Ask a mechanic in our community
2013 Buick Regal ProblemsSerpentine Belt Tensioner Pulley May Wear Out
The serpentine belt tensioner pulley may wear out. Our technicians tell us that in order to get a new pulley from General Motors you must purchase a complete belt tensioner assembly.
The 2011-2013 Buick Regal is known to have issues with the EVAP system, a part of your emission control system.
To correct the issue, the EVAP canister vent valve, solenoid, and wiring must be inspected. The most common fix is replacement of the wiring connector or replacement of the vent valve assembly.
2013 Buick Regal Questionsinfotainment system quit Checked radio fuses 4/5 ok. Reconnect batt wrked 4aday (1 answer)
I've had car for a month. It worked great then all of the sudden it quit. The radio still plays quietly. None of the radio controls work on the steering wheel or the dash. The screen is black. It did come on once but the controls didn't work now nothing.
Whats the name of the transmission in my car?
The car ran fine two days ago. Parked it in my garage Friday afternoon, Sunday evening it was dead! This happened once before, dealer had to tow it in and was able to jump start it at the shop. Something electrical appears to either stay on or turn itself on and completely drain the battery. ...
2013 Buick Regal RecallsThe Generator Control Module May Fail
eAssist is a hybrid drive system that includes an electric motor to assist the gas engine under certain driving conditions. These vehicles are being recalled because there may be an internal fault with the Generator Control Module (GCM). The module could allow the battery to discharge to the point were the vehicle could stall and/or not start. Also, a burning smell, smoke, and/or a fire could develop in the trunk. Dealers will inspect and replace the GCM to correct this concern.
The front turn signals are equipped with two bulbs on each side. If one bulb fails, the driver would not be made aware of the loss of light function, which could create a safety hazard. Dealers will update the body control module software free of charge to resolve the concern.