2011 BMW Z4 sDrive Repair and Maintenance

A guide to problems, costs, maintenance and repair for your 2011 BMW Z4 sDrive

Get a Repair Estimate
Guaranteed by certified locations nationwide. Learn more
Get a Repair Estimate For Your 2011 BMW Z4 sDrive
RepairPal estimates are guaranteed at over 1,700 quality certified locations nationwide. Learn more

2011 BMW Z4 sDrive Problems

Check Engine Light with Code P30FF and Rattle from Engine

The BMW Z4 sDrive35i turbo engine suffers from waste gate issues which become progressively worse with normal driving and especially with harsh driving conditions.

The turbocharger uses exhaust gas to create air pressure which is then forced into the engine. When there is no demand for power, the exhaust gases are released into the exhaust through a waste gate to prevent the turbo from speeding up.

“Waste gate rattle” or “Turbo rattle” is a result of excessive movement between the waste gate and the waste gate seat. This is a progressive issue with the following symptoms:

  • Rattling at cold start
  • Rattling upon deceleration
  • Loss of power
  • Check Engine Light Illumination
  • Manufacturer Specific OBD trouble code P30FF
  • Very poor engine performance and MPG

Adjustment of the waste gate actuator can solve the issue, but the issue will return. If adjustment does not correct the issue, the turbocharger waste gate must be rebuilt with new bushings, or the turbocharger must be replaced. BMW has replaced many turbocharger assemblies under warranty to correct this issue.

See More Problems (1)

2011 BMW Z4 sDrive Recalls

Engine Timing Bolts May Loosen And Break

The bolts that secure the housing for the variable camshaft timing adjustment unit can loosen over time and possibly break, causing engine damage and engine stalling. Dealers will replace the four bolts for both intake and exhaust timing units free of charge to resolve the concern.

The Battery Cable Connection at the Fuse Block May Break

The vehicle battery is connected to the fuse box via a heavy duty cable. It has been determined that the cable connection at the fuse box can degrade over time, resulting in increased electrical resistance. This increased resistance can cause the connection point to overheat and break, resulting in a loss of electrical power and causing the engine to stall, increasing the risk of a crash. Dealers will replace the positive battery cable connector and secure it with an improved method to correct this concern.

See More Recalls (2)