2012 BMW X6 xDrive Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2012 BMW X6 xDrive
Never overpay. Check prices with our estimator
2012 BMW X6 xDrive ProblemsCheck Engine Light with Code P30FF and Rattle from Engine
The BMW X6 xDrive turbo engine suffers from waste gate issues which become progressively worse with normal driving and especially with harsh driving conditions.
The turbocharger uses exhaust gas to create air pressure which is then forced into the engine. When there is no demand for power, the exhaust gases are released into the exhaust through a waste gate to prevent the turbo from speeding up.
“Waste gate rattle” or “Turbo rattle” is a result of excessive movement between the waste gate and the waste gate seat. This is a progressive issue with the following symptoms:
- Rattling at cold start
- Rattling upon deceleration
- Loss of power
- Check Engine Light Illumination
- Manufacturer Specific OBD trouble code P30FF
- Very poor engine performance and MPG
Adjustment of the waste gate actuator can solve the issue, but the issue will return. If adjustment does not correct the issue, the turbocharger waste gate must be rebuilt with new bushings, or the turbocharger must be replaced. BMW has replaced many turbocharger assemblies under warranty to correct this issue.
2012 BMW X6 xDrive RecallsDriver's Frontal Air Bag Inflator Ruptures And Sprays Metal Fragments
The driver's frontal air bag inflator may deploy the air bag with excessive pressure, resulting in the inflator rupturing and causing metal debris to be sprayed onto vehicle occupants. Dealers will replace the driver's frontal air bag free of charge to resolve the concern.
The bolts that secure the housing for the variable camshaft timing adjustment unit can loosen over time and possibly break, causing engine damage and engine stalling. Dealers will replace the four bolts for both intake and exhaust timing units free of charge to resolve the concern.
Vehicles equipped with an 8 or 12 cylinder turbocharged engine may overheat the circuit board for the auxiliary water pump. This could lead to smoldering of the pump or an engine compartment or vehicle fire. Dealers will replace the auxiliary water pump to correct this concern.