The front thrust rod bushings—also referred to as tension strut bushings—are known to fail occasionally. The oil-filled rubber mounts weaken and crack over time, causing a mushy road feel and shuddering in the steering wheel when going over bumps. These worn bushings should be replaced.
Resources for the Repair and Maintenance of your 1991 BMW 735i
1991 BMW 735i
1991 BMW 735i Problems
1991 BMW 735i Recalls (Recent)
Summary: THE AIR BAG CONTACT RING LOCKING TAB LOCATED IN THE STEERING WHEEL ASSEMBLY CAN BREAK WITHOUT WARNING.Learn more »
Summary: THE BRAKE LIGHT SWITCH CAN FAIL ALLOWING THE SWITCH TO REMAIN IN THE "BRAKE LIGHTS OFF" POSITION OR IN THE "BRAKE LIGHTS ON" POSITION.Learn more »
Summary: SOME OF THESE VEHICLES ARE EQUIPPED WITH A THROTTLE HOUSING ON WHICH THE THROTTLE VALVE SHAFT RETAINING NUT WAS NOT SUFFICIENTLY TIGHTENED.Learn more »
Summary: VEHICLE DESCRIPTION: PASSENGER VEHICLES. A MALFUNCTION OR FAILURE OF A COOLANT SYSTEM COMPONENT, SUCH AS A THERMOSTAT, WATER PUMP, OR FAN BELT, CAN RESULT IN SIGNIFICANTLY INCREASED COOLANT TEMPERATURE AND SYSTEM PRESSURE. IF THE INDICATIONS OF A CRITICAL OVERHEATING CONDITION IS NOT NOTICED BY THE DRIVER, IT IS POSSIBLE THAT DAMAGE TO, OR FAILURE OF, A COOLANT SYSTEM COMPONENT COULD OCCUR.Learn more »
Summary: FEED FUEL HOSES CAN HARDEN AND "SET" OVER TIME, ALLOWING A SEEPAGE OF FUEL AT THE CONNECTION BETWEEN THE HOSE AND THE ENGINE FITTING. THE CLAMP USED TO HOLD THE HOSE TO THE FITTING IS UNABLE TO COMPENSATE FOR THE HARDENING OF THE FEED FUEL HOSE.Learn more »
1991 BMW 735i Questions and Answers
How can i get the car out of sleep mode? The doors will not unlock and the windows will not let down.
this car was well taken care of and i drove to work the other day and smoked a cig.w/ac on, as always, and bofore i was done it was dinging saying coolant temp. so i shut off car and waited 2hrs. ...
When this happens I have to pull over because the car will slow down and I have to turn off key and then turn back on and then will drive ok. It is almost like something has to reset in the transmi...
the stop light in the windshield works but the rest of rear stop lights do not. I replace the bulbs and still nothing