A fluid leak may develop from one or more power steering hose. When a leak is being repaired, it is not uncommon for multiple hoses to be replaced.
Resources for the Repair and Maintenance of your 1992 BMW 325is
1992 BMW 325is
1992 BMW 325is Problems
1992 BMW 325is Recalls (Recent)
Summary: THE AIR BAG CONTACT RING LOCKING TAB LOCATED IN THE STEERING WHEEL ASSEMBLY CAN BREAK WITHOUT WARNING.Learn more »
Summary: THE VEHICLE FAILED TO COMPLY WITH FMVSS 208. THE DRIVER'S CHEST RESULTANT ACCELERATION EXCEEDED THE ALLOWABLE 60 G'S IN A CRASH TEST WHEN THE SEAT HEIGHT CHANGES ADJUSTMENT UNDER SEVERE FRONTAL IMPACT.Learn more »
Summary: THE MALFUNCTION OR FAILURE OF A COOLANT SYSTEM COMPONENT RESULTS IN SIGNIFICANTLY INCREASED COOLANT TEMPERATURE AND A RESULTING INCREASE IN SYSTEM PRESSURE.Learn more »
Summary: THE CRUISE CONTROL AND THROTTLE CABLES ARE ATTACHED TO THE SAME THROTTLE VALVE ACTUATING LEVER AT THE THROTTLE HOUSING. IT IS POSSIBLE THAT THE PLASTIC BUSHING ON EITHER CABLE COULD BREAK DUE TO ENVIRONMENTAL INFLUENCES COUPLED WITH VIBRATION. IF THE BUSHING BREAKS, THE OUTER CABLE HOUSING CAN SEPARATE FROM THE BUSHING. IN THIS CASE, DURING APPLICATION OF THE THROTTLE PEDAL WITHOUT CRUISE CONTROL BEING ENGAGED, THE OUTER TUBE COULD CATCH ON THE EDGE OF THE BROKEN BUSHING.Learn more »
Summary: FEED FUEL HOSES CAN HARDEN AND "SET" OVER TIME, ALLOWING A SEEPAGE OF FUEL AT THE CONNECTION BETWEEN THE HOSE AND THE ENGINE FITTING. THE CLAMP USED TO HOLD THE HOSE TO THE FITTING IS UNABLE TO COMPENSATE FOR THE HARDENING OF THE FEED FUEL HOSE.Learn more »
1992 BMW 325is Questions and Answers
I recently put in a new radio and every since I can't put the top of my 325i Converible down also the tachometer stopped working at the same time I'm thinking I might have disconected som...
After starting the car it seems to idle fine but periodically it will surge and idle erratic. Check engine light is now on, but it too will sometimes will go off. Car will also just started to over...
trying to find out what a mechanic will charge me to replace the ecm