1991 BMW 318is Repair and Maintenance

A guide to problems, costs, maintenance and repair for your 1991 BMW 318is

1991 BMW 318is Problems

Multiple Power Steering Hoses May Simultaneously Fail

A fluid leak may develop from one or more power steering hose. When a leak is being repaired, it is not uncommon for multiple hoses to be replaced.

See More Problems (1)

1991 BMW 318is Questions

my car always started but i changed the relays all of them now it wont start (2 answers)

well i changed the plastic coolant tube that sits under the throotle and next to the injectors and fuelrail right onder the intake uits a plastis tube that has coolant water run through it and i might of pulled a sensor knockwire off caquse its hangin.i changed around the relays and forgot what ...

where is the slave cylinder located and how do I bleed it? (1 answer)

I also need a diagram of the whole bmw motor please labled?

See More Questions (2)

1991 BMW 318is Recalls

Recall 94V066000
FEED FUEL HOSES CAN HARDEN AND "SET" OVER TIME, ALLOWING A SEEPAGE OF FUEL AT THE CONNECTION BETWEEN THE HOSE AND THE ENGINE FITTING. THE CLAMP USED TO HOLD THE HOSE TO THE FITTING IS UNABLE TO COMPENSATE FOR THE HARDENING OF THE FEED FUEL HOSE.
Recall 93V015000
THE MALFUNCTION OR FAILURE OF A COOLANT SYSTEM COMPONENT RESULTS IN SIGNIFICANTLY INCREASED COOLANT TEMPERATURE AND A RESULTING INCREASE IN SYSTEM PRESSURE.
Recall 91V219000
THE CRANKCASE VENTILATION SYSTEM, VENTED INTO THE INTAKE TRACT OF THE ENGINE AT THE BELLOWS BOOT AHEAD OF THE THROTTLE HOUSING, ALLOWS WARM WATER VAPOR FROM THE CRANKCASE VENT TO CONDENSE AND FREEZE IN THE COLDER BELLOWS BOOT WHEN THE AMBIENT AIR TEMPERATURE IS 15 DEGREES FAHRENHEIT OR LESS. THE ...

See More Recalls (4)