Car Won't Start Due to Ignition Module/Crankshaft Position Sensor Failure on Chevrolet Cavalier

The ignition module or crankshaft position sensor may fail causing the engine to die and not restart. Diagnoses will be necessary to determine if the module or crank sensor is causing the no start condition.

RepairPal Verified
Average mileage: 113,758 (94,000–125,000)
Engines affected: 2.2L 4 Cylinder, 2.4L 4 Cylinder, 3.1L V6
6 model years affected: 1990, 1991, 1992, 1993, more1994, 2001
10 people reported this problem
3 people shared problem details
1994 Chevrolet Cavalier- 3.1L V6
it will turn over but will not start for me at all
Ignition Control Module had to be replaced. Also Ignition Lock Cylinder but not Crankshaft Position Sensor.
1993 Chevrolet Cavalier- 2.2L 4 Cylinder94,000
Crank but no start, had to tow it to the nearest shop, It was both the crankshaft sensor and the ignition module. wasn't cheap. >.<
Related Items:
My daughter just bought this car. We put a new battery in it and it still won't crank. When w...
The heater blower runs when the ignition is shut off, also the power windows and sunroof open and close as well. Battery runs down and car won't start. Replaced the Heater Resistor and that didn'...
Just had front wheel bearings and all brake lines done. After got home and sat for awhile went...
After replacing the fuel pump, the crank sensor, crank relay, and finally the main loom wiring...
OKAY LET`S START WITH THE ALTERNATER THAT HAD BEEN REPLACED CAME APART IN THE MIDDLE, MY SON T...

Related Content