CAR WONT START on 1994 Dodge Caravan

NEED TO FIND OUT WHERE THE CRANK SHAFT SENSOR AND THE CAMSHART SENSOR IS LOCATED ON A 1994 DODGE CARAVAN. THANKS

by in Fresno, CA on August 30, 2009
1 answer
ANSWER by on August 30, 2009
On a 1994 3.0 V6 the crank sensor and cam sensor are part of the distributor. They are inside under the rotor. you have to replace the distributor. Good Luck! The part runs about $350. Good Luck!
Related Items:
van cranks over but wont start,cheaked starter and altnanter and thet are fine, changed battery and fuel pump and still wont start, so im not sure what it could be
go to start the car and cylyniod clicks and it wont turn over could it be the cylniod or starter
The fuel pump went out, replaced with a new one. Car was turning over and firing but it quit firing, no spark.I was told from a friend to check relays and fuses, all good. Put on new crank sensor, ...
Thursday, 02/10/11, car door auto latch started making bad noise in driver's door. Friday, 02/11/11, in afternoon it sounded worse. That same night, at 7:30, drove to store, locked car - sound ev...