1996 Mitsubishi Galant Q&A
1996 Mitsubishi Galant Question: Car Cranks But Wont start
Can you check the diagnostic trouble codes and post them, that will give us something more to go on. - Bret Bodas
The crankshaft position sensor may fail causing a no start and/or stalling condition. Replacement of the failed sensor will generally corrects this concern.
Checked and replaced timming belt, there was no problem with the old belt. all the timming marks were aligned right. Still have low compression 90# to 50# Motor ran perfectly smooth when i last tur...
While driving the timing belt broke which caused damage to the head. I had both replaced also the cam and shaft sensors and a nother belt. Now that they have it put together it wont get a fire.
car will not start has fuel going to rails and, there is spark. Is this this fuel injectors and if so how troublesome is diy and possible steps...?
Car wont turn over- turn key in ignition will begin but will not "ignite" will not turn over and start. Not dead that turn key and nothing happens. Took to mechanic, said computer sensor, charged $200, now three week later exact same problem
Costing me more time and money and will need car towed to mechanic - do I pay this same mechanic again? The "fix" lasted only 3 weeks, exactly same problem, charged me $200. Should I demand fix wi...