Buick Recalls

Summary:
THESE VEHICLES WERE ASSEMBLED WITH CENTER REAR SEAT BELT ANCHOR BOLTS NOT PROPERLY INSTALLED. THIS DOES NOT MEET THE REQUIREMENTS OF FMVSS NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES."
Summary:
SOME OF THESE VEHICLES HAVE A STRAINED OR SEPARATED WASHER/WIPER SWITCH POWER FEED WIRE.
Summary:
THE STEERING COLUMN LOWER PINCH BOLT WAS NOT PROPERLY TIGHTENED DURING ASSEMBLY.
Summary:
THE WHEEL LUG NUTS WERE NOT TIGHTENED TO THE PROPER SPECIFICATION DURING ASSEMBLY.
Summary:
DURING ASSEMBLY OF THE LEFT REAR QUARTER PANEL, SOME WELDS WERE MISSED. THIS DOES NOT COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 301, "FUEL SYSTEM INTEGRITY."
Summary:
DURING DEPLOYMENT OF THE PASSENGER AIR BAG, THE AIR BAG FABRIC CAN SNAG ON A REINFORCEMENT INSIDE THE INSTRUMENT PANEL, CAUSING THE EXPANDING AIR BAG TO LIFT THE INSTRUMENT PANEL PAD AND THEN DEPLOY UNDER THE INSTRUMENT PANEL INSTEAD OF THROUGH THE DOOR IN THE INSTRUMENT PANEL.
Summary:
A BACKFIRE DURING ENGINE STARTING CAN CAUSE BREAKAGE OF THE UPPER INTAKE MANIFOLD.
Summary:
THE LEFT FRONT BRAKE LINE CAN CONTACT THE TRANSAXLE MOUNTING BRACKET OR ATTACHMENT BOLT.
Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES MANUFACTURED FROM AUGUST 1991 THROUGH JULY 1995. THE TRANSMISSION OIL COOLER LINE CAN SEPARATE WHEN THE VEHICLE IS OPERATED IN LOW TEMPERATURES IN COMBINATION WITH HIGH TRANSMISSION LOADS.
Summary:
THESE VEHICLES WERE ASSEMBLED WITH ONE OR MORE INCORRECT SAFETY BELT AND/OR SAFETY BELT BUCKLE ENDS. THIS DOES NOT CONFORM WITH THE REQUIREMENTS OF FMVSS NO. 209, "SEAT BELT ASSEMBLIES."

Related Content