Car problem reports
Problem with your car? See what our experts say or submit your own.
Newest reported 1991 Buick Skylark problems
The head light assembly may not be installed correctly after a head light bulb is replaced causing the head light aim to be incorrect.
The engine vacuum hose to the MAP sensor may crack resulting in a vacuum leak causing the engine to run rough and/or stall.
The torque converter clutch can stick "on" after extended freeway driving causing the engine to stall when coming to a stop. Our technicians tell us when this occurs, the engine usually will restart and stall when put into gear. After allowing about twenty minutes for the engine and transmission to cool down, the engine will start and the transmission will operate normally. Replacing the torque converter clutch solenoid, transmission filter, and fluid will generally correct this issue.
The timing chain tensioner and guides are prone to wear and may develop an abnormal noise, requiring replacement.
The heater core under the right side of the dashboard may leak engine coolant which can puddle on the passenger front floor. The loss of coolant may cause an engine overheating condition. Our technicians tell us that removal of the dash board is necessary to replace the heater on these vehicles.
The fuel pump may fail causing engine to stall and not restart.
A coolant leak may develop from the water pump. This can result in an engine overheating condition. A leaking water pump will require replacement.
An automatic transmission fluid leak may develop from the rubber section of a transmission cooler line. In some cases the rubber section of hose can be replaced. In others, the complete cooler line must be replaced to correct this type of leak.