The mass air flow or crankshaft position sensor may fail causing the engine to stall intermittently. Proper diagnoses will be necessary to determine the cause of any stalling condition.
2003 Buick Park Avenue Problem Reports
Newest 2003 Buick Park Avenue Problem Reports
I've had an intermittent no-start condition on my 2000 Buick Park Ave. This started happening on occasion and was nerve racking. Took it to my local mechanic shop and he replaced the crankshaft position sensor which solved the problem. Found the problem with the sensor 'A'(18X24X) out of range. Code PO336-CKP. in the computer. Hope this info will help others who have this problem.
Illumination of the Check Engine Light can be caused by a loose or worn gas cap.
The outer tie rod ends on the steering linkage may wear causing excessive free play in the steering and uneven tire wear. If the worn tie rod ends are replaced, the wheel alignment should be checked and adjusted as necessary.
The mode and temperature door actuators may fail causing improper air flow or temperature output from the heating and AC (HVAC) system.
The rubber section of an automatic transmission cooler line may develop a fluid leak . In some cases the leaking section of hose can be replaced. In others, the complete cooler line must be replaced to correct this concern.
The high pressure power steering hose will commonly leak fluid; it should be replaced.
It is common for the fuel level sensor in the fuel tank read the fuel level incorrectly. The sensor must be replaced to correct the condition. Our technicians recommend having the complete fuel pump module replaced on high mileage vehicles.
The front struts may show signs of wear, or be excessively bouncy ride at freeway speeds. This may begin to occur at around 75,000 miles.