1999 Buick Park Avenue Questions

Answered 1999 Buick Park Avenue Questions

Ask a Question
View:RecentAnsweredUnanswered
Im about to buy a 1999 buick park ave and its been sitting for about 2 years now. The previous owner said the she stopped driving it because she got a different car, and its been sitting for a while and she said she w...
the fuel gauge is stuck in the bottom side of the stop post as well as the temp gauge. I read that a magnet will fix the fuel gauge, will it also fix the temp gauge? I just bought the car and I would like to fix it. M...
It is not constant, doesn't do it all the time. Would it be wise to replace the coil operating the no.6 piston?
It started tonight. It was difficult to turn over and when it started I had to floor it to get it to turn over. As soon as I let off the gas it dies. I have also had issue with the fuel gauge for the last year. When t...
My car cuts off after fill ups. It will start back up, but it usually cuts off several times, before running without stopping again. I've replaced the fuel pump and fuel filter already in July. It didn't solve the pr...
Coming out exhaust..car cut of the other day..why can it b?
tried pushing the open and lock button on the driver door several times
I have replaced tires, struts and shocks, front end aligned, tires balanced. Car drives fine until @ 63 mph until @ 75 mph and then a significant vibration. It lessens after 75 mph but does not go away. It is not noti...
When turn off they will not return to their place of origin. They will stay in the same place before going off.
I had it scanned and these are the codes P0102, P0107, P0134, P0300, P0403 and P1107.And I forgot 2 new parts I replaced both Oxygen Sensors.
My Check Engine Light comes on while in drive it flashes. The new parts that have been put on are Spark Plugs, Plug Wires, Coolant Temperature Sensor and Ignition Coils. Please help I parked it and also it doesn't ge...
After reading a few posts on here, I'm pretty sure my transmission pressure control solenoid is going out.it has done this twice so far: It will not shift out of 1,2,or 3rd gears. It seems to run fine and change from ...