1991 Buick Century Questions

Answered 1991 Buick Century Questions

Ask a Question
View:RecentAnsweredUnanswered
91 Custom: Did the following: 1. Tested fan still works 2. Replaced Temp Sensor 3. Replaced the Thermostat 4. NO Trouble Codes 5. Tested ECM ( by unplugging he MAF Sensor, this caused trouble code car -car ran er...
I changed my fuel filter,changed my burned out fuse which was(eng/ac),and checked all fuel lines,sprayed carburetor cleaner and cranks but wont turn on.Now i rechecked everything now there's no power going through the...
I have water in the oil on 91 3300 century. Car has 100000 miles. Is it worth taking apart and replacing heads or gaskets?
Ive replaced fuel filter, fuel pump, fuel injectors, injector o-rings, fuel lines, throttle body kit, throttle position sensor, abc throttle body chip, mass air flow sensor, coil packs, spark plugs, spark wires, water...
it just started happening, but only seems to occur when the throttle is pressed, either from driving or from pressing the linkage from the engine
we have a buick that stalls out after engine runs an will not restart have had ecm maf crank sensor coil packs and ignition module replaced an the problem still remains. any idea
I have had the maf , crank sensor , ignition module , coil packs , and fuel pump checked an they all tested in good even replaced the ecm
it was firing on 2 cylinders and now when i put it in gear it stalls
It has 198,000 already and I want to keep it as long as possible.it is my prize possesion at this time.
Tires are old, was adviced to replace them by seller. I bought this car for 500.00 and so far so good. I will like to keep it as long as possible. Advice as to how to maintain in top shape will be highly appreciated. ...
Bought this Buick Century 1991 a few months ago, gave it a tune up and all but I need new tires. the label on the driver's door in ineligible, so..... Can I get some help deciphering this? Also my back windows are hal...
I replaced the battery and alternator in it
how long will it take to replace pressure and return hoses on the power steering.
What is the minimum thickness of break rotor?
My transmission seams to go through alot of fluid but I can not see any evidence of a leak under the car. I put a half quart every 50 or so miles. When it is low it will not shift into third gear. Also it shifts hard ...