The steering rack may fail causing the steering to become hard to turn.
Problems for specific Buick Century years:
Car problem reports
Problem with your car? See what our experts say or submit your own.
Repairpal verified 1990 Buick Century problems
The inside door handle may break causing the door not to open from the inside.
The outer tie rod ends on the steering linkage may wear causing excessive free play in the steering and uneven tire wear. If the worn tie rod ends are replaced, the wheel alignment should be checked and adjusted as necessary.
One or more power window switch may fail. The affected window may work intermittently before failing completely.
The torque converter clutch can stick "on" after extended freeway driving causing the engine to stall when coming to a stop. Our technicians tell us when this occurs, the engine usually will restart and stall when put into gear. After allowing about twenty minutes for the engine and transmission to cool down, the engine will start and the transmission will operate normally. Replacing the torque converter clutch solenoid, transmission filter, and fluid will generally correct this issue.
The fuel pump may fail causing engine to stall and not restart.
A coolant leak may develop from the water pump. The engine may overheat as a result of the coolant loss. A leaking water pump should be replaced.
A ticking noise may develop from the engine due to a cracked exhaust manifold. Damaged exhaust manifolds will require replacement to correct this issue.
The rubber section of an automatic transmission cooler line may develop a fluid leak . In some cases the leaking section of hose can be replaced. In others, the complete cooler line must be replaced to correct this concern.
The high pressure power steering hose will commonly leak fluid; it should be replaced.
The front struts may show signs of wear, or be excessively bouncy ride at freeway speeds. This may begin to occur at around 75,000 miles.