Brakes not working. on 2000 Cadillac Escalade

My brake lights are not working. I've changed the bulbs, fuses, and the brake switch. I'm stuck with no brake lights. What else could the issue be. Thank you!

by in Bridgeport, CT on December 22, 2009
3 answers
ANSWER by on December 22, 2009
In the labor guide I see Remove and Replace stoplight relay with a repair time of .3 of an hour, but I can't find the part anywhere so it must be a dealer only item
1 person likes thisFlag inappropiateReply
ANSWER by on August 29, 2010
ck that your hazard light sw. works if not you"ll have to replace it be cause that controls your brake lights as well
ANSWER by on November 26, 2010
Replace your dimmer LT SW,I have a 2000 as well and that was my problem. If you have time it will take about 4 HR not a job for part time mac.
1 person likes thisFlag inappropiateReply
Related Items:
Power brake systems using "hydro-boost" may leak power steering fluid from the hydro-boost unit located behind the brake master cylinder. Replacement of the hydro-boost unit is the common repair to...
all three lights illuminate at the sametime. replaced speed sensors no difference. the parking brake not holding could this make the lights come on
While braking into a corner the steering wheel will lock up and not turn. When let off turns fine and only does to the left. is this a wheel bearing just had all new brakes and rotors put on
Brake lights quit working turn signals are acting like bulbs are blown but when I replaced the bulbs they still don't work. Need some info on how to troubleshoot this problem

Related Content