Q&A

1992 Audi 100

Question: brakes

Question

harley3w, Greenville, SC, January 24, 2010, 12:35

 Rookie

the brakes are going all the way to the floor!I replaced the master cyclinder still the same so i tried to bleed the brakes nothing what my p and how could i pin point the problem

1 Answer

Answer It

Flag This

Follow this Question Unfollow this Question

• Answer #1

  some guy January 24, 2010, 14:04
  

   Journeyman

  if you are sure the master is ok, the brakes are bled correctly and there are no external leaks then check the brake hoses for swelling. also, if you had brakes done recently it may be the pads are "compressing" too much. this usually happens when rotors are old and pads are new until the can "seat" to each other.
  Reply
  Flag This
  Like | 2 people like this2

• I am replacing the steering rack boot on my Audi 100 Avanti 2.3. Any suggestions
  I am at the no return stage where I have cut the old boot off (it was had it anyway) and unbolted the rack both ends and the oil lines. Do I undo it from the colum, the are two cap srews by the loo...

  Q&A > Audi > 1994 Audi 100

• Auto chek gremlins
  The auto chek lights and beeps for the brakes, headlight and a few others come on and off constantly while there is no actual problem.

  Q&A > Audi > 1993 Audi 100

• engine leak
  my car is leaking oil from the left top back side of the engine i changed my gaskets even the valley pan and its still leaking. what else could be the problem? thanks jess

  Q&A > Audi > 1993 Audi 100