brakes on 1995 Ford Ranger

brake peddle goes all way tt floor master cilender was low on fluid but can not find out where fluid is going

by in Columbus, MS on February 14, 2010
2 answers
ANSWER by on February 14, 2010
Sometimes a master cylinders piston will wear out internally and will need replacement also when your pads and shoes wear down to the minimum amount of friction materials the master cylinder will appear low because the brake fluid was forced down the system, better have your brakes checked for leaks and before metal to metal contact if the pads or shoes are worn out
1 person likes thisFlag inappropiateReply
ANSWER by on March 05, 2010
if it's standard check the clutch
1 person likes thisFlag inappropiateReply
Related Items:
Moisture inside the rear brake drum assemblies can cause the rear drum brakes to grab, or lock when first driving. Inspect the rear brakes, replace the rear shoes as needed...
The front brakes may stick, bind, or grab. This can happen when the front brake caliper pins become corroded. C...
my brake lights arent working, but all other lights are, and the fuses and bulbs are good and i replaced the brake switch at the top of the pedal also and still i have no lights --what could this be?
my brakes lock up even though i have abs and have replaced the modulator
I replaced all brakes,and my brakes still lock up .the abs was checked and is fine Could it be the front bearings o...

Related Content