1990 Ford E-350 Q&A

1990 Ford E-350 Question: brakes

got a 1990 e350 box truck that has just about no brake pedal we have changed the master cylinder and the front brake pads also adjusted the rear brake shoes -
Answer 1
good start but did you bleed the system? Pull the rear wheels and check the cylinders and shoes. make sure fluid is going to the rears. Roy -
Answer 2
With antilock brakes and not moving the abs bleeds the presure down - take it for a test run (be careful) it may be ok. -
Related Items:
The brake pedal is spongy and under pressure goes to the floor. I also notice when I have a helper depress the brake pedal while I look into the brake fluid Reservoir, the fluid boils up. No air, j...
THE MECHANIC says no brake fluid in the vacuum hose, but the fluid IS disappearing from the Brake Master. I'm SURE THAT it is being sucked into the engine (?) VIA the BRAKE -POWER-BOOSTER. ~ THA...
The third brake light, plus the 2 standard rear brake lights will not shut off.
when i first push the brake pedal,it goes down to the floor,i have to pump the pedal 4 to 5 times to get a good pedal,but the firm pedal does not stay,it stillreturns to the floor,i have replaced t...
My brakes are dragging on my 1993 ford Econoline van e350. I have changed the master cylinder, front cal...