brake lights on 1997 Chevrolet 1500 Pickup

after replacing bulbs and fuses the brakelights still do not work

by in Santa Rosa, CA on September 18, 2010
3 answers 2 comments
ANSWER by on September 19, 2010
Check the switch, should be on the brake pedal arm. With a test light, you should be able to see of the switch has power or operates at all.
COMMENT by on September 21, 2010
I don't see any switch on the break pedal just a shaft going through the fire wall..whatnext
ANSWER by on September 20, 2010
I don't see any switch on the break pedal just a shaft going throught the fire wall
ANSWER by on October 01, 2010
did u replac the switch on the brahe pedal
COMMENT by on October 02, 2010
had to have switch replaced at repair garage because it was behind dash and firewall. Works fine now.
Related Items:
the brake light comes on after a mile or so of driving had brakes checked everything seems brakes good just the light comes on what could cause this?
...t first it was just the left turn signal not working now neither turn signal will work and the brake lights won't come on anymore, all bulbs, sockets, fuses are fine. All other lights work when turned o...
It started with no right rear turn signal and no brake light. Light panel is good.I know this because I put it on another truck just like mine.New plug was put on.Than the left side rear also went ...
Down,but if I only push down halve way it does not blow the fuse.
the problem occurs whenever im driving sometimes when i press on the brake pedal the light goes out for about 10 to 20 minutes then lights up again. i.ll pump my brakes and sometimes it goes out an...

Related Content