Upon deployment the passenger airbag inflator could rupture, increasing the risk of personal injury. BMW dealers will replace the affected airbag inflator modules to correct this concern.
BMW 325xi Recalls
This limited regional recall is for vehicles currently registered or first sold in Florida, Puerto Rico, Hawaii and the U.S. Virgin Islands, and equipped with Takata-brand air bag inflators. Upon deployment the driver and/or passenger airbag inflator could rupture, increasing the risk of personal injury. BMW dealers will replace the affected airbag inflator modules to correct this concern.
The front passenger seat contains a mat that determines the presence and size of a seat occupant. This input to the airbag controller helps to determine if and how forcefully the passenger airbag should deploy in the event of a crash. The detection mat can develop cracks and fail. If this were to occur, the airbag would not deploy as expected, increasing the risk of personal injury. Dealers will repair the occupant detection mat to eliminate the possibility it may crack. Additionally certain vehicles will receive and extended warranty on the front passenger seat occupant detection mat.
Airbags use a chemical reaction contained in an inflator module to create the pressure necessary to inflate the bags when deployment is required. These vehicles are being recalled because the front passenger airbag inflator may produce excessive internal pressure when deployed. As a result, the inflator module could rupture, causing metal fragments to strike vehicle occupants. Dealers will inspect and replace any defective passenger front airbag inflator modules found.
High resistance in the electrical contacts may cause one or more of the rear lights to stop working. Intermittent light operation reduces the ability to warn other motorists of the driver's intentions, increasing the risk of a crash. Dealers will repair the affected vehicles as necessary to correct this concern.
On 25 vehicles, the bolt securing the front control arm and swivel bearing were not tightened to specification and could loosen over time. If the nuts loosen, vehicle handling and control could be compromised, increasing the risk of a crash. Dealers will tighten the front control arm and swivel bearing connection to the correct specifications. The recall began November 21, 2006.