BMW 760Li Recall 03V324000
Engine Oil Filter Drain Plug May Not Be Tight
Engine, September 12, 2003
RepairPal Expert Overview
Our Quick Take:
An oil drain plug may loosen, causing an initial spray of oil and then a leak.
What Should You Do?
Please contact your BMW dealer. They will check to see if your specific vehicle is affected and advise you on what to do next. Always have your vehicle identification number (VIN) handy when you call.
The engine oil filter drain plug may not be tightened to specification. This could lead to loosening of the drain plug, causing an initial spray of oil and then a leak. If enough oil drains, engine damage can result, and crash could result if the damage is severe enough. Dealers will inspect the torque of the oil filter drain plug, and tighten if necessary. The recall began September 12, 2003.
Original Recall from the NHTSA
Model Year(s): 2003
Manufacturer's Report Date: September 12, 2003
NHTSA CAMPAIGN ID Number: 03V324000
NHTSA Action Number: N/A
Component: ENGINE AND ENGINE COOLING
Potential Number of Units Affected: 2,400
Summary: ON CERTAIN PASSENGER VEHICLES, THE ENGINE OIL FILTER DRAIN PLUG MAY BE INSUFFICIENTLY TIGHTENED. THIS COULD LEAD TO LOOSENING OF THE PLUG CAUSING AN INITIAL OIL SPRAY AND A SUBSEQUENT OIL LEAK.
Consequence: IF A LARGE AMOUNT OF OIL LOSS OCCURS, ENGINE DAMAGE MAY RESULT. DEPENDING ON THE EXTENT OF THE DAMAGE, A CRASH COULD OCCUR.
Remedy: DEALERS WILL INSPECT THE TORQUE OF THE OIL FILTER DRAIN PLUG AND, IF NECESSARY, RETIGHTEN THE DRAIN PLUG WITH THE CORRECTLY SPECIFIED TORQUE. OWNER NOTIFICATION BEGAN ON SEPTEMBER 12, 2003. OWNERS SHOULD CONTACT BMW AT 1-800-831-1117.
Notes: CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION¿S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Recall data provided by the National Highway Traffic Safety Administration