Problem Reports
Report A ProblemProblem with your car? See what our experts say or submit your own.
2001 Audi A6
Check Engine Light Due to Faulty Torque Converter
A problem with the torque converter can cause the Check Engine Light to illuminate.
Multi-Link Suspension Components May Wear Prematurely
Premature wear in various multi-link suspension components can cause noises that are difficult to diagnose. Worn suspension parts can also cause uneven tire wear and create steering alignment problems.
Digital Display on Instrument Cluster May Fail
The digital display portion of the instrument cluster may fail. Our technicians tell us the entire instrument cluster will need to be replaced to correct this concern.
Inspect CV Boots and Joints at Each Service
Our technicians recommend having the constant velocity (CV) boots and CV joints inspected at each service. Servicing torn CV boots early can prevent the need to replace the CV half shaft or CV joint.
Various Probelms Caused by Clogged Plenum Tray Drain
Clogged drains can allow rainwater to accumulate in the plenum tray (at the base of the windshield). The water may leak into the vehicle's interior, brake booster, or electrical components, which can lead to major problems. Our technicians recommend keeping the tray clear of leaves, pine needles, and other debris.
ABS Light Due to Control Module Failure
The anti-lock brake system (ABS) control module may fail causing the ABS light to illuminate. Failed modules should be replaced to restore ABS operation.
Water From Clogged Sun Roof Drains May Damage Control Modules
Clogged sunroof drains can allow water to enter the interior and accumulate under the carpet where various control modules are mounted. Over time, the accumulated moisture can damage the control modules.
Flasher Relay Failure Can Cause Erratic Turn Signal Operation
Erratic turn signal operation can be a result of a failing turn signal flasher relay which will require replacement.
Inspection of Water Pump and Timing Belt
The water pump may fail resulting in engine overheating and possible timing belt damage. Overheating and/or timing belt failure can result in very expensive engine repairs. As a precaution, it is recommended to inspect the timing belt and water pump at regular intervals.
Engine Oil Leaks
Engine oil leaks are common from the valve cover gaskets and camshaft chain tensioner gasket.
Cannot start car when engine is still warm
When try to re-start engine when the engine is above 200F, it cannot be started. You have to wait till engine cools down under 200F to start it again. The problem is the bad coolant sensor, can be replaced easily.
Featured Shops and Dealerships
