2000 Audi A4 Problems

RepairPal has identified the most common problems with the 2000 Audi A4 as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.

Refine by vehicle
Choose your vehicle
Known Problems

Clogged drains can allow rainwater to accumulate in the plenum tray (at the base of the windshield). The water may leak into the vehicle's interior, brake booster, or electrical components, which can lead to major problems. Our technicians recommend keeping the tray clear of leaves, pine needles, and other debris.

Engine oil leaks are common from the valve cover gaskets and camshaft chain tensioner gasket.

An ignition coil or spark plug may fail unexpectedly resulting in an engine misfire and possible illumination of the Check Engine Light. Vehicles equipped with spark plug wires may also develop a misfire caused by a failed spark plug wire.

A problem with the torque converter can cause the Check Engine Light to illuminate.

The water pump may fail resulting in engine overheating and possible timing belt damage. Overheating and/or timing belt failure can result in very expensive engine repairs. As a precaution, it is recommended to inspect the timing belt and water pump at regular intervals.

Vacuum leaks, oxygen sensor failure, and catalytic converter efficiency faults can cause the Check Engine Light to illuminate.

Premature wear in various multi-link suspension components can cause noises that are difficult to diagnose. Worn suspension parts can also cause uneven tire wear and create steering alignment problems.

The anti-lock brake system (ABS) control module may fail causing the ABS light to illuminate. Failed modules should be replaced to restore ABS operation.

To avoid sludge accumulation inside the engine, our technicians recommend using the proper synthetic oil with the appropriate oil filter.

Our technicians recommend having the constant velocity (CV) boots and CV joints inspected at each service. Servicing torn CV boots early can prevent the need to replace the CV half shaft or CV joint.

Clogged sunroof drains can allow water to enter the interior and accumulate under the carpet where various control modules are mounted. Over time, the accumulated moisture can damage the control modules.

Erratic turn signal operation can be a result of a failing turn signal flasher relay which will require replacement.

The digital display portion of the instrument cluster may fail. Our technicians tell us the entire instrument cluster will need to be replaced to correct this concern.