Arrowhead Auto Care
(602) 993-1488
Glendale, AZ 85308
Hours of operation:
| Mon - Fri | 7:00am to 6:00pm |
Family owned and operated general repair shop! Napa Auto Care facility! Nationwide warranty!
|
Auto Makes We Service:
|
Specialties:
| AC/Heating | Check Engine Light | Diagnosis | Muffler & Exhaust |
| Oil Change & Lube | Scheduled Maintenance | Service & Repair | Timing Belts |
| Tire Sales/Repair | Transmission Repair |
Amenities:
| Early Bird Dropoff | Extended/Evening Hours | Financing | Free Inspection |
| Gas/Diesel | Heated Waiting Room | Rental Car | Service Guarantee |
| Shopping Nearby | Shuttle | Towing | Warranty Accepted |
Customer Reviews (5 reviews)
5 Sort by: Date | Helpful- Arrowhead Auto Care
-
Arrowhead Auto Care
I went in to Arrowhead Autocare with my Gmc pickup running very bad I brought it to several repair shop and nobody could figure it out. Joe had it for 1 hour and told me it would cost 150.00 I sad please fix the problem and now my truck runs perfect and I wouldnt bring my car any where else... Thank alot joe for the expert service. You have me for life...
Flag ThisLike0 - Arrowhead Auto Care
- Arrowhead Auto Care
- Arrowhead Auto Care
Featured Shops and Dealerships
Recent Answers by Arrowhead Auto Care
"Sounds like a torque converter problem. Sounds like the lock-up is enguaged in the converter? Good Luck!"
"Your vehicle has no dipstick. You have to check the level at the transmission under the car. There are plugs in the side you take out the center plug to check the level. Sorry,no easy task."
"Check bulb first, good chance it is just a blown bulb?"
"It might sound crazy...check your battery cables? Esp. the the connecting cable from battery to battery."
"Sounds like your idle air control is bad? The idle air controller sets the idle higher when the air conditioning is running."
"The job is as it looks..easy. It only calls for .5 labor to change this fan motor out. I would run from the shop that said 6 hours!"
"Either the breather hose is plugged or there is a kink in the fill line."
"The carrier bearing is fairly easy to change with the right equipment. You will need a hydralic press in order to get the bearing on and off. A shop should charge you around $75.00 to $125.00 labor."
"Sounds like your window regulator has broken. Remove the door panel and it should be easy to if the regulator or motor has failed."
"This code is for a camshaft positioning sensor. If you have replace this and you are still getting a code you need to check the wiring in this circuit? We would be glad to check this for you if you..."