2001 Acura MDX Problems
RepairPal has identified the most common problems with the 2001 Acura MDX based on complaints from actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.
The Acura MDX may develop issues with the automatic transmission.
Rough shifting may occur, and the “D4” light and check engine may begin to blink. The check engine light will also illuminate, and OBD trouble codes P0700, P0730, P0740, P0780, P1768 and/or P1768 will be stored in the computer.
If the transmission shifts roughly, the failure is very likely mechanical failure of the transmission. If the transmission performs normally, a faulty sensor, or dirty transmission fluid may be the case.
In most cases, it is necessary to use professional diagnostic equipment to provide a diagnosis, and complete the repair.
The longevity of the transmission is dependent on strict adherence to the manufacturer's recommendation for ATF replacement intervals and procedure.
Acura issued a recall on a number of 2005 vehicles because the gas tanks were improperly manufactured and could leak in the event of a crash. It is unclear if all the fuel fill issues are related to the recall or not. For more information on this recall please click here»
The exhaust recirculation valve (EGR) on the 2002-2017 Acura MDX may fail, causing:
The EGR valve has open and closed positions, and opens or closes on command from the computer.
Exhaust gases constantly pass through the valve when it is open, leaving carbon deposits on the valve. These carbon deposits may lead the the valve sticking in the open or closed position.
To correct this issue, sometimes it is sufficient to clean the valve, but replacement is recommended in all cases.
For further information on your vehicle's issue, try out our diagnostics tool here.
A shudder or vibration may develop while driving at speeds between 35 and 40 MPH. Our technicians tell us this condition is commonly caused by a failed automatic transmission torque converter. It is recommend to replace the torque converter and install an updated powertrain control module (PCM) to correct this concern.
To review some comments from the RepairPal community regarding this issue, please click here>>