Toyota Supra Problem Report

Toyota Supra ABS Warning Light Due to Failed Wheel Speed Sensor

(7 reports)

At higher mileages, an anti-lock brake system wheel speed sensor may wear out and illuminate the ABS warning light. It is recommended to replace the sensor with a factory part and be sure to clean all rust and debris from the mounting area because the mounting distance is critical. Failure to do so may result in the new sensor setting false trouble codes. Be sure to check the condition and runout of the front wheel bearings on the 2WD and 4WD vehicles and the CV joints on the 4WD vehicles since worn wheel bearings and/or CV joints can cause the ABS trigger rings to rub against the ABS sensors and damage them.

 

Related Items:
how to take out the starter cant get to one of two bolts
A code P0770 or P0773 may occur at higher mileages which indicates that the 3-way lock-up solen...
At higher mileages (125,000+) the mass air flow sensor may cause the vehicle to idle rough, run...
At higher mileages, (125,000-150,000) the automatic transmission may not shift correctly. This...
The Throttle Position Sensor can get out of adjustment due to wear in the throttle body or due...