ABS module on 1997 Ford Expedition

What is the part number for the ABS module on a Eddie Bauer

by in Chico, CA on August 18, 2009
1 answer
ANSWER by on August 18, 2009
I am not sure if the Eddie Bauer is available in 2WD and 4WD models, the ABS module would be different for each. The Expedition is also available in 4.6 and 5.4Liter engines that year so you may need the VIN number to get the right module. Try looking at www.rockauto.com also look at his website www.fuelinjectioncorp.com they rebuild fuel injection computers and may also repair ABS modules or can tell you who does. They are the cheapest and the best at repairing Fuel Injection computers and have a quick turn around time. The module I think is mounted on top of the hydraulic control unit in the driver's side rear of the engine compartment, you may be able to read the numbers right off the unit itself.
2 people like thisFlag inappropiateReply
Related Items:
ABS LIGHT ISW ON ALL THE TIME YOU OPERATE THE VEHICLE
...tiny bit different then the other 3. In this case the 4 ABS sensors each send a signal to the ABS module which then send a signal via CAN to the ECM. Ive pulsed my own signal to the ECM with a test t...
I like to fixe me;abs control Module on Ford expedition
the brakes get hard to push down every time i turn to the left or back up to the left, anything that has to do with turning the steering wheel to the left, but anyways the brakes get hard to where ...
The sensors have been tested good, reset module but abs and trac lights come back on. What would it cost me to have this replaced and programed? Thank You