4 wheel drive on 2000 Chevrolet Silverado 2500

when i go to put my truck in 4 wheel drive the 4 low button and 4 high button just blink and will not go in. also my towing button on the shifter dosen't work ether.

by in Cedar Rapids, IA on July 22, 2010
1 answer
ANSWER by on July 22, 2010
MOST LIKELY CAUSE IS THE TRANSFER CASE ENGAGEMENT SOLENOID IS STUCK OR IN-OP. YOU WILL NEED TO TAKE IT TO A REPAIR FACILITY THAT HAS A TECH II GM SCAN TOOL TO GET AN ACCURATE DIAGNOSTIC.
Related Items:
The 4WD transfer case encoder motor position sensor or the selector switch may fail causing the service 4WD message to be displayed. Fault code(s) stored in the transfer case control module will ...
i have a 1993 chev silverado ext cab 6,5 turbo diesel,i have had a frt pass side grinding noise .just put new calipers brake lines,pads and rotors turned and noise still there.it gets louder around...
My font pinion bearing in my front diff. froze up and when I activated my four wheel drive at 45 miles an hour the truck felt like the brakes were put on and I smelled clutches burning. I replaced ...